产品中心

你所在的位置:网站重庆时时彩>舱门 Hatch door
A19_舱门 Hatch door

充气密封条舱门



        




霍曼充气密封条舱门旨在提供高效的密封解决方案,提供防止粉末,颗粒,气体,液体和灰尘侵入的保护。

这些气动气密密封件对于密封制造的设备件非常有用,其中:

·          密封间隙可能会有所不同

·          组装和拆卸需要快速简单

·          卫生程序存在(FDA申请和法规)

通常从特定的凹槽尺寸中进行加工,密封件可以轴向操作,以及向内和向外的径向运动。最受欢迎的要求是FDA批准的硅胶弹性体,蓝色,白色或红色氧化铁颜色。其他弹性体和颜料可用于各种密封应用。

我们的气动密封接合方法采用高压喷射成型技术(硫化),它使用在接头处注入的相同的化合物来产生高强度的粘结,从而形成干净光滑的线条。没有粘合剂形成粘结的一部分。该过程提供了高度完整性的密封,能够在比大多数(如果不是全部)其它相似类型的密封件在市场上更高和更高的压力下执行。

还可以根据客户/应用的要求,将大多数类型的可充气连接器与密封件结合使用。该过程通过将连接器硫化成密封件的相同复合体局部注射将连接器连接到密封件。硫化连接器的强度远远超过与这种类型的密封件相关的任何机械固定或胶粘连接器。


也可以使用其它材料,其中包括含氟聚合物如氟橡胶和氟硅氧烷,抗细菌银负载硅酮和EPDM

上海霍曼制造的所有充气密封件都经过独立的压力测试,并提供支持的“测试证书”。这些对自由站立,无支撑密封的测试取决于型材类型和/或客户规格,从1 bar到4 bar压力。借助专门设计的试验台,封装密封件,我们的生产技术经过验证的案例检测和支持。

根据要求,可以将其提供给客户场所,以验证将要并入原始设备中的密封设计。在大多数情况下,密封件可以在短短几天内运行60,000个循环,从而为应用提供了非常宝贵的安全保护。


These pneumatic airtight seals are extremely useful for sealing fabricated pieces of equipment where:

·          the sealing gap might vary

·          assembly and dis-assembly needs to be quick and simple

·          hygienic procedures exist (FDA applications and regulations)

Generally working from within a specific groove size the seals can operate axially, and for both inward and outward radial movements. The most popular requirements are for FDA approved Silicone Elastomer in either Blue, White or Red iron oxide colours. Other Elastomers and Pigmentations are available for a wide variety of sealing applications.

Our pneumatic seal joining method incorporates a high pressure Shot Moulding technique (Vulcanizing), this utilizes an identical compound injected at the joint to produce a high strength bond, resulting in a clean smooth line finish. No adhesives form part of the bond. This process provides a High Integrity seal capable of performing under greater and higher pressures than most if not all other similar type of seals in the market.

This process bonds the connector to the seal by localized injection of identical compound vulcanizing the connector to the seal. The strength of Vulcanized Connector far exceeds any mechanical fixing or adhesive bonded connector, associated with this type of seal.

Other materials are also available which include Fluoropolymers such as Viton® and Fluorosilicone, Anti-Bacterial Silver loaded Silicones and EPDM.®

All inflatable seals manufactured by Shanghai huomann are independently pressure tested and supplied with a supporting ‘Test Certificate’. These tests on free standing, unsupported seals vary from 1 bar to 4 bar pressure, dependent on the profile type and/or customer specification. With the aid of purpose designed test rigs, which enclose the seal, our production techniques are tested and supported with proven case history.

 

电话
消息
二维码
分享
重庆时时彩 重庆时时彩 重庆时时彩 重庆时时彩 重庆时时彩 重庆时时彩 重庆时时彩 重庆时时彩 重庆时时彩 重庆时时彩